• Lycra Fleece fabric for ultimate weather comfort.
• Terry sweat wipes.
• Silicone finger and palm prints for grip.
• Touch screen fabric AX CONNECT on forefinger and thumb even left & right hand. 
• High strapless cuff to fit under jacket sleeves.

• Reinforced synthetic leather Amara on palm side is supple and durable.
• Silicone printing for perfect grip.
• Touch screen fabric AX CONNECT on forefinger and thumb even left & right hand.
• Micro-Injection Velcro closure blends comfort with an unrestricted wrist movement.
• High strapless neoprene cuff to fit under jacket sleeves.

• Tough, stretch rib mesh backhand panels
• Neoprene knuckle protection panel with de-bossed detailing
• Lightweight Protection - TPU and neoprene overlays add protection in key areas.
• Elastic Lycra web between fingers for maximum ventilation
• Light padding for maximum dexterity and bar feel
• Silicone print on palm and fingertips for grip
• Durable synthetic suede palm and fingers
• Velcro® adjuster strap and neoprene cuff for secure fit
• Thumb overlay for added durability.

• Main large zipped pocket with inner pocket and hydration reservoir holder.
• 2 separate zipped pockets.
• Removable zipped pocket attached to the shoulder strap (wallet, mobile phone 6.5").

• Comfortable and ventilated back system.
• Anatomically shaped and ventilated shoulder straps and waist belt.
• Height adjustable chest strap with whistle.
• Inner pocket with holder for hydration reservoir (tube holders on shoulder straps)
• Light and durable material (main parts Nylon 200D)

• Raincover.
• Separate loop for flashing light.
• Reflective elements.
• Elastic mesh for easy fixation of the helmet.

• Volume 9 l
• Weight 590 g.
• Height 50 cm, width 20 cm.

• LED chip 1300 lm / 27 W  for High Beam and Low Beam.
• Excellent side visibility.
• LED battery capacity & charging indicator 0-100%.
• Large capacity lithium-ion battery model 21700 3,7V / 5000 mAh with protection PCB – replaceable easily.
• Integrated USB-C port with powerbank function designed to recharge any USB device.
• USB-C charging port aprox. 5 h (5V/1.6A Max).
• IP-65 Dust tight - no ingress of dust. Gives protection against low pressure water jets from any direction.
• Smart memory switcher.
• Turning lens.
• Safe Ride Home 50 lm steady / 1:00 h - switch ON automatically when the battery capacity is less than 15%.
• Adaptor for GoPro standart fixation brackets (included).
• Helmet mount bracket – easy fixation on bicycle helmet (optional # UA 12060163 Bracket ACC-519).
• Alloy & polycarbonate body.
• Size 118 mm x 33 mm x 33 mm / weight 207 g incl. bracket.

• High Beam 1300 lm - 2:00 h, 600 lm - 4:30 h, 300 lm - 7:30 h
• Low Beam 700 lm - 3:30 h, 300 lm - 6:50 h, 150 lm - 11:00 h, flashing and SOS – 15:00 h

• LED battery capacity monitor is integrated in switcher and lights once the device is switch ON. Green LED – capacity is over 70% / Blue LED - capacity is over 30% / Red LED - capacity is over 15%. Once the battery capacity is lover than 15%, the red LED flash and Safe Ride Home mode is switch ON. 
• Long push to switch OFF in any light mode, long push again to switch ON in the same mode.
• Make a double click (once the light is switch ON) to switch between High Beam mode and Low Beam mode, the normal click switch light power intensity.

• LED integrated in swithcer light red once the battery is charging and change to green light once the battery is fully charged.

• Integrated USB-C port is engineered with powerbank function to charge any electronic devices when you're on the way. Switcher’s LED light blue after 30 s aprox. from beginning of charging.

• Charge a battery every 3 month for 30 minutes minimally to keep maximum battery capacity for long term. There should be ambient temperature 5 – 40 °C during the charging.

• 4 steady light modes, 2 flashing light modes
• Excellent side visibility.
• Battery capacity indicator  integrated in switcher.
• Large capacity lithium-ion rechargeable battery 3,7V / 2500 mAh with protection PCB.
• Charging time aprox. 5 hrs (5V/1,5A charger) – use the original cable.
• Charging cable included (USB A / Micro C).
• IPX65 Dust tight - no ingress of dust. Gives protection against low pressure water jets from any direction, as well as condensation and water spray.
• Smart Memory switcher.
• Turning lens - light can be fixed under the handlebar.  
• Adaptor for GoPro standart fixation brackets (included).
• Reinforced plastic bracket with universal clamp -  fixation d. 22 mm - 36 mm.
• Helmet mount bracket – easy fixation on bicycle helmet (optional # UA 12060163 Bracket ACC-519).
• Alloy & polycarbonate body.
• Size 106 mm x 29 mm x 29 mm / weight 123 g with bracket.

• Steady light: 800 lm - 1:30 h; 630 lm – 2:00 h; 480 lm – 2:45 h; 200 lm – 6:45 h
• Flashing : 200 lm – 13 h; 480 lm – 5:30 h

• LED battery capacity monitor is integrated in switcher and flash every 3 s once the light is switch ON. Once the light is switch OFF make a single click to get capacity battery information. Green LED – capacity is over 80% / Blue LED - capacity is over 30% / Red LED - capacity is less than 30%.
• Long push to switch OFF in any light mode, long push again to switch ON in the same mode.
• Make a double click (once the light is switch ON) to switch between steady modes and flashing modes, the normal click switch light power intensity.
• Switcher lock function – 5x clicks to lock the switcher to protect the light against unwanted power on (for example during a transport in bag) . Another 5 clicks unlock the function.

• There is a LED close to USB C port, light red once the battery is charging and change to green light once the battery is fully charged. 

• Charge a battery every 3 month for 30 minutes minimally to keep maximum battery capacity for long term. There should be ambient temperature 5 – 40 °C during the charging. 

• LED 600 lm.
• 4 steady light modes, 2 flashing light modes
• Excellent side visibility.
• Battery capacity indicator  integrated in switcher.
• Large capacity lithium-ion rechargeable battery 3,7V / 2200 mAh with protection PCB.
• Charging time aprox. 5 hrs (5V/1,5A charger) – use the original cable.
• Charging cable included (USB A / Micro C).
• IPX65 Dust tight - no ingress of dust. Gives protection against low pressure water jets from any direction, as well as condensation and water spray.
• Smart Memory switcher.
• Adaptor for GoPro standart fixation brackets (included).
• Reinforced plastic bracket with universal clamp -  fixation d. 22 mm - 36 mm.
• Helmet mount bracket – easy fixation on bicycle helmet (optional # UA 12060163 Bracket ACC-519).
• Alloy & polycarbonate body.
• Size 100 mm x 29 mm x 29 mm / weight 118 g with bracket.

• Steady light: 600 lm - 1:40 h; 450 lm – 2:10 h; 350 lm – 3:20 h; 150 lm – 9:00 h
• Flashing : 150 lm – 19 h; 350 lm – 7:00 h

• LED battery capacity monitor is integrated in switcher and flash every 3 s once the light is switch ON. Once the light is switch OFF make a single click to get capacity battery information. Green LED – capacity is over 80% / Blue LED - capacity is over 30% / Red LED - capacity is less than 30%.
• Long push to switch OFF in any light mode, long push again to switch ON in the same mode.
• Make a double click (once the light is switch ON) to switch between steady modes and flashing modes, the normal click switch light power intensity.
• Switcher lock function – 5x clicks to lock the switcher to protect the light against unwanted power on (for example during a transport in bag) . Another 5 clicks unlock the function.

• There is a LED close to USB C port, light red once the battery is charging and change to green light once the battery is fully charged.

• Charge a battery every 3 month for 30 minutes minimally to keep maximum battery capacity for long term. There should be ambient temperature 5 – 40 °C during the charging.

• 5x XPE red LED 400 lm.
• Wide angle visibility.
• Automatic Brake Sensor - Once you are slowing down all LED’s will shine 3 seconds in 300 lumens.
• Battery capacity indicator 0-100% integrated in switcher
• Battery Li-Poly 3,7 V / 800 mAh with PCB protection.
• Charging time 2 h aprox.  USB-C 5V/1.6A (Max). 
• IPX65 Dust tight - no ingress of dust. Gives protection against low pressure water jets from any direction, as well as condensation and water spray.
• Smart Memory Switcher.
• Safe Ride Home (flashing mode 8 lm - 0:45 h).
• Remote control – handlebar fixation.
• Material Alloy & polycarbonate.
• Size  82 × 27 × 27 mm / weight 52 g.

• Tool free bracket with silicon strap for diameter 15 – 35 mm even the unround profiles.
• Separate bracket for saddle rails fixation.
• Pannier rack plate fixation ( 2 pcs of M5 screws – reflector screw dimension 50 mm )..
• Clothing clip.

• Steady light: 15 lm – 10:00 h / 80 lm – 3:00 h.
• Flashing: 160 lm – 3:00 h / 80 lm – 6:00 h / 8 lm- 40:00 h.
• Day Flash 400 lm – 12:00 h / 300 lm – 15:00 h.

• LED battery capacity monitor is integrated in switcher and lights once the device is switch ON. Green LED – capacity is over 70% / Blue LED - capacity is over 30% / Red LED - capacity is over 15%.
• Once the battery capacity is less than 15%, the red LED flash and Safe Ride Home mode is switch ON automaticaly.
• Long push to switch OFF in any light mode, long push again to switch ON in the same mode.

• LED integrated in swithcer light red once the battery is charging and change to green light once the battery is fully charged.

• Charge a battery every 3 month for 30 minutes minimally to keep maximum battery capacity for long term. There should be ambient temperature 5 – 40 °C during the charging.

• Fixation on diameter 22 – 36 mm even the unround profiles.
• Buttons: LOCK / UNLOCK - anti-theft setting, BELL – acoustic bell, LIGHT – press to change light modes, long push switch OFF/ON the light.

• STEADY MODES: 8 lm – 7:00 h, 16 lm – 4:30 h, 30 lm – 2:30 h.
• FLASHING MODES: 20 lm – 10:00 h, 18lm – 9:00 h, 6lm – 90:00 h.
• IPX65 Dust tight - no ingress of dust. Gives protection against low pressure water jets from any direction, as well as condensation and water spray.
• Battery capacity indicator and charging indicator. Battery capacity:  green LED  flashing  - capacity 0–30 % Charging : green LED flashing = charging, steady green light = full charged.
• USB 2.0 A / Micro C charger cable is not included.
• Battery pack LI-poly 3,7 V / 300 mAh. Charging time max 2:00 h. Recommended discharging / charging period – minimum 1× / 6 months. Min. 500 charging cycles.
• Easy clip fixation on round profile d. 30 – 32 mm, with attached rubber pad on d. 26 – 28 mm.
• Size 35 × 40 × 40 mm, weight 27 g.

• For wheel diameter 24“; 26“, 27,5“; 29“ a 700c – max. tire’s width 50 mm (2,0“).
• Compatible with V-Brakes and suspension fork.
• Adjustable “L “ shape bracket allows move the mudguard position in the bicycle frame.
• Material: steel, polypropylene - 100% recyclable.
• Weight: 282 g (set).
• We strictly recommend professional assembly in bicycle shop / service.

• 3-point safety harness.
• One-handed childproof buckle.
• Grow with your child - adjustable footrests in 4 positions and 2 positions to place the safety harness.
• Quick release frame holder.
• Large feet protection.
• 1 rear reflective sticker.
• Child weight  9-22 kg. 
• Frame tube bracket d. 28-40 mm. 
• Seat dimension w.412 x h.667 x d.574 mm
• EN 14344 standard.
• This product requires assembly by specialists.

• 3-point safety harness.
• One-handed childproof buckle.
• Grow with your child - adjustable footrests in 4 positions and 2 positions to place the safety harness.
• Quick release frame holder.
• Large feet protection.
• 1 rear reflective sticker.
• Child weight  9-22 kg. 
• Frame tube bracket d. 28-40 mm. 
• Seat dimension w.412 x h.667 x d.574 mm
• EN 14344 standard.
• This product requires assembly by specialists.

• 3-point safety harness.
• One-handed childproof buckle.
• Grow with your child - adjustable footrests in 4 positions and 2 positions to place the safety harness.
• Specific metallic bar for low geometry frames or for 29“ bikes.
• Quick release frame holder.
• Large feet protection.
• 1 rear reflective sticker.
• Child weight  9-22 kg. 
• Frame tube bracket d. 28-40 mm. 
• Seat dimension w.412 x h.667 x d.574 mm
• EN 14344 standard.
• This product requires assembly by specialists.

• 3-point safety harness.
• One-handed childproof buckle.
• Large feet protection.
• Grow with your child - adjustable footrests in 4 positions and 2 positions to place the safety harness.
• 1 rear reflective sticker.
• Child weight  9-22 kg. 
• CFS mounting system for bicycle carrier in accordance EN14872/max.load 25 kg, width of carrier 120 - 175 mm.
• Seat dimension w.412 x h.667 x d.574 mm
• EN 14344 standard.
• This product requires assembly by specialists.

Výměnná koncovka / RD hanger F-Z35-141D
Modelové roky / Model years (MY):
MY2022-23 Versus 1.0, Versus 2.0

>>> Všechny koncovky AUTHOR kol
>>> All RDHangers of AUTHOR bikes
updt.:2023-11-23

Výměnná koncovka / RD hanger F-Z149-175D-1
Modelové roky / Model years (MY):
MY2022-23 Versus 3.0

>>> Všechny koncovky AUTHOR kol
>>> All RDHangers of AUTHOR bikes
updt.:2023-11-23